The Wargamers' Forum

Does anyone know if a manufacturer of these tried all the usual to no avail. (Doms Decals I94 Skytrex QRF Battlefront)

If not some guidance on size of 20mm ones such as these.

http://www.milicast.com/shop/product.ph ... =86&page=4

Hopefully they'll fit as actually going on a Churchill like this.



Failing that I'll go for a 67 on red and muddy it up a bit for 12th RTR.

I’ve used Aleran a lot, work well on carriers etc

I've used Dom's decals, but the turn around time can be slow.

Fire at Will wrote: ↑Sun May 13, 2018 5:51 am I've used Dom's decals, but the turn around time can be slow.

Sadly yes..I have a March order, still awaited, and it's a pity as the rang and pricee is excellent and I am ok using his 15mm decals on 1/72.

Dom is my preferred supplier but he doesn't do any for the junior brigade. Trouble getting the Brown to print apparently.

Looking at a few more images it seems the AoS and unit markings were absent so I have another option.

wargameroz wrote: ↑Sat May 12, 2018 11:45 pm I’ve used Aleran a lot, work well on carriers etc

Thanks so could work on a 15mm Churchill then.

NTM wrote: ↑Sun May 13, 2018 8:58 am

wargameroz wrote: ↑Sat May 12, 2018 11:45 pm I’ve used Aleran a lot, work well on carriers etc

Thanks so could work on a 15mm Churchill then.

Unlikely. I have found the Dom’s As a great size for 20mm vehicles and often I have trouble fitting a Aleran on my vehicles.

Thanks Richard. Looks like I'll have to go with one of the alternative options then.

RichardM wrote: ↑Sun May 13, 2018 9:33 am

NTM wrote: ↑Sun May 13, 2018 8:58 am

wargameroz wrote: ↑Sat May 12, 2018 11:45 pm I’ve used Aleran a lot, work well on carriers etc

Thanks so could work on a 15mm Churchill then.

Unlikely. I have found the Dom’s As a great size for 20mm vehicles and often I have trouble fitting a Aleran on my vehicles.

Funny, I’ve not had that problem, but I do tend to use a lot of Humbrol 26 to represent dirt/dried mud so perhaps I haven’t noticed